Back

Calibration & Bump Test Kit

Calibration & Bump Test Kit

To complement our range of Gas Sensor, Flamefast offer Calibration and Bump test kits for proving the correct operation and maintain our complete range of sensor.

All gas sensors must be bump tested following installation, not only to prove that the sensor or system have been installed correctly but to prove the functionality of the sensor. They must also be calibrated at least annually.

All sensors deteriorate over time; the elements in Catalytic sensor wear, the Diodes in the Infra-red and Fluorescent elements glaze over, and the Electro-chemical compound depletes. These factors affect the output signal from the sensors, so the sensor range must be recalibrated to compensate.

Downloads

View FileCalibration & Bump Test Kit

Technical Specification

Flamefast offer two types of test gases:

Calibration Gas
Bump Test Gas

Calibration Kit

Part No Description
CAL-GAS Calibration Gas - Specify (See Below Mixtures)
CAL-KIT 0.5l/m Fixed Flow Regulator, Hood & Hose
CAL-BUMP 12L Test Gas - 50% LEL CH4/300ppm CO/Air
CAL-REG-B 0.5-1l/m Adjustable Regulator

View our Gas Safety Solutions

View our Gas Safety Solutions

Not sure what you need?

Not sure what you need?

Ask one of our Experts

Ask one of our Experts

Call us on... 01925 281 230