Back

Flamefast Gas Sensor Duct Mount (FGSD)

Flamefast Gas Sensor Duct Mount (FGSD)

The Flamefast Duct Mounted Gas Sensor is one of the most cost effective and versatile units available on the market. With a Voltage Output, and Volt Free Contact the FGS can connect directly into most third party controllers or can easily connect to the New LCD based range of panels using the BACnet output.

With most modern buildings the plant room safety systems are BMS integrated, and the FGS has been designed with this in mind. It can be treated like any other field sensor, the latching facility allows direct integration with the primary safety circuit, then simply pulse the Digital Input to reset once the alarm has cleared. This negates the requirement for a controller, cutting down cost of the equipment and installation.

Downloads

View FileFlamefast Gas Sensor Duct Mount - FGSD

Key Features

  • 24V AC/DC Power Supply
  • Pre-calibrated
  • Traffic light LCD readout
  • Volt Free Contact output
  • BACnet Interface (16 Address)
  • Latching function with Reset input
  • Analogue output
  • Touch button setup and calibration
  • Calibration and ‘End of Life” Reminder
  • Oxygen Sensor monitors for Enrichment and Depletion as standard
  • 200mm Duct Probe
  • UK MANUFACTURED

Installer Selectable Options

  • LCD backlight Enable/Disable (White backlight)
  • Failsafe option:
    • DE-energise/Energise Relay
    • 0-10V or 2-10V
  • Display Gas Concentration or Gas Formula
  • Latching/Non-Latching
  • Sounder Enable/Disable
  • Add 1 Minute time delay on Relay and Sounder

Dimensions

Height 152 mm
Width 110 mm
Depth 50 mm
Probe Length 200 mm

Technical Specification

Power Supply 24V AC/DC ±10%
Power Consumption Catalytic (CAT) - 70mA
@ 24 Electrochemical (EC) - 40mA
Infra-red (IR) - 70mA
Fluorescent (FL) - 40mA
Analogue Output 0/2-10V Full Scale Linear
VFC Output Rating SPDT - 1A @ 24V Max
Operating Conditions Temp 0-40°C
Humidity 0-95% (NC)
Response Time (T90) < 1 Minute
Sampling Method Diffusion
Warm-up Time 2 minutes
IP Rating IP40
Housing Material Flame Retardant ABS
Approval CE

Part Numbers & Options / Accessories

Part No Description Range Life Type
(ppm) (years)
FGSD-NG Methane (CH4) 0-100% LEL 5 CAT
FGSD-LPG LPG 0-100% LEL 5 CAT
FGSD-H2 Hydrogen 0-100% LEL 5 CAT
FGSD-NGIR Methane 0-100% LEL 10 IR
FGSD-CO2IR Carbon Dioxide 0-5% VOL 10 IR
FGSD-CO Carbon Monoxide 0-300ppm 5 FC
FGSD-O2 Oxygen 0-25% VOL 5 FL
FGSD-NO2 Nitrogen Dioxide 10ppm 3 EC
FGSD-NO Nitric Oxide 100ppm 2 EC
FGSD-H2 Hydrogen 2000ppm 2 EC
FGSD-CL2 Chlorine 5ppm 2 EC
FGSD-O3 Ozone 5ppm 2 EC
FGSD-SO2 Sulfur Dioxide 20ppm 2 EC

View our Gas Safety Solutions

View our Gas Safety Solutions

Not sure what you need?

Not sure what you need?

Ask one of our Experts

Ask one of our Experts

Call us on... 01925 281 230