Back

VentGuard Plus- Integral Fan Current Monitor

VentGuard Plus- Integral Fan Current Monitor

The VentGuard Plus is a cost effective BS6173:2009 and IGEM/UP/19 compliant ventilation interlock, with built in fan current monitors for the intake and extract fans.

With dedicated interfaces and LEDs for the intake and extract fans, the VentGuard will provide an indication of any ventilation issues, however, will not shut down the gas supply until the ventilation has not been operating for a full 30 seconds to avoid any nuisance tripping.

Downloads

View FileVentGuard Plus - Integral Fan Current Monitor

Key Features

  • Clear LCD indication
  • Integral 2 Channel Fan Current Monitor
  • Interfaces for:
    • Intake Fan, Extract Fan, CO2 Sensors, Remote Emergency Stop Buttons
  • Mains rated status relay for external monitoring
  • Built in time delays to avoid nuisance tripping
  • 5 Year Warranty
  • UK MANUFACTURED

Technical Specification

Power Supply 100 -240VAC 50/60Hz
Consumption (Max) 50W
Fan Current Rating 0.2 - 15A @ 230V
Power Output Gas Solenoid - Switched Mains
IP Rating IP65
Approval CE

External Device Interfaces

Valve Status SPDT - 5A @ 240V Max
CO2 Sensor 24V Signal to monitor external VFC
Intake Fan 24V Signal to monitor external VFC
Extract Fan 24V Signal to monitor external VFC
Remote Stop 24V Signal to monitor external VFC

Dimensions

Height 180 mm
Width 130 mm
Depth 60 mm / 65 mm including Stop ∓ Key Switch

Basic Operation

The VentGuard has a simple key switch operated ON/OFF function and a panel mounted flush emergency stop button to avoid accidental operation.

The panel has interfaces for air DP switches as well as have integral fan current monitors for both the intake and extract. Each channel can be easily setup using the range select jumper (for greater accuracy) and a potentiometer for fine tuning.

If the intake or extract fan are not in operation the panel will still allow gas through until they have been open circuit for a full 30 seconds. As some systems use the valve status to enable the fans this will allow the fans to get up to speed and provide a healthy signal to the VentGuard without any issues.


Part Numbers & Options / Accessories

Part No Description
VGP-PO VentGuard Plus Panel

View our Gas Safety Solutions

View our Gas Safety Solutions

Not sure what you need?

Not sure what you need?

Ask one of our Experts

Ask one of our Experts

Call us on... 01925 281 230