Calibration Gas

To complement our range of Gas Sensors and Detectors, Flamefast offer Calibration Gas and Calibration kits. These can be used to prove the correct operation of sensors (bump test), as well as to provide the required annual calibration.

PLEASE NOTE: THE BAC & TR RANGES DO NOT REQUIRE ANNUAL CALIBRATION

Overview

To complement our range of Gas Sensors and Detectors, Flamefast offer Calibration Gas and Calibration kits. These can be used to prove the correct operation of sensors (bump test), as well as to provide the required annual calibration.

With the 110l cylinder and 0.5l/min fixed flow regulator, you will get approximately 220 minutes of gas, which can be used to either bump test or calibrate 100 to 300 sensors.
The Calibration Gas must be ordered specific to the target gas of the sensors you are working with, and they are non-refillable so must be disposed of appropriately. 

PLEASE NOTE: THE BAC & TR RANGES DO NOT REQUIRE ANNUAL CALIBRATION

Technical Specifications

Cylinder Volume:110 Litre
Cylinder Pressure:70 Bar
Dangerous Goods Class:2.2 (Non-flammable Compressed Gas)

The standard cylinder provided is a dual gas cylinder so can be used for most plant room applications, and includes:

  • Methane 2.5% (50% LEL)
  • Carbon Monoxide 200ppm
  • Balance Air

Other Gases are available on request – this must be clearly specified at point of order.

Part Numbers & Options / Accessories

PART NODESCRIPTION
CAL-GAS110l Calibration Gas Cylinder (Specify Mixture)
CAL-KIT0.5l/m Fixed flow regulator, hood & 2m hose

Data Sheets

General specifications in .pdf format

There are currently no videos available