ServiceGuard

The ServiceGuard is a combined gas proving and services isolation system and is designed to meet the requirements of IGEM/UP/11 Edition 2 for gas safety and provide complete control for the water and electric supplies. With a single key switch to enable, each service can be turned On or Off individually depending on the requirements.

Top Key Features

  • Clear LCD indication & instructions
  • No commissioning required
  • Annual Service Reminder
  • 24V DC auxiliary power output
  • UK MANUFACTURED

Overview

The ServiceGuard is a combined gas proving and services isolation system and is designed to meet the requirements of IGEM/UP/11 Edition 2 for gas safety and provide complete control for the water and electric supplies. With a single key switch to enable, each service can be turned On or Off individually depending on the requirements.

With a backlit LCD, the ServiceGuard will provide a clear indication of any issues with external devices such as ventilation systems, and will provide details of gas pressures and Gas Sensor levels.

The ServiceGuard is designed to isolate all services when the room is vacant to protect the area from misuse or vandalism.

Key Features

  • Clear LCD indication & instructions
  • No commissioning required
  • Annual Service Reminder
  • 24V DC auxiliary power output
  • Interfaces for: Gas Sensors, CO2 Sensors, Ventilation Systems, Remote Emergency Stop Buttons
  • Built in time delays to avoid nuisance tripping
  • Three Options available: 1) Gas & Water Isolation, 2) Gas & Electric Isolation, 3) Gas, Water & Electric Isolation
  • 5 Year Warranty

UK MANUFACTURED

Dimensions

Height:180 mm
Width:180 mm
190 mm - including hinge
Depth:60 mm
65 mm - including stop & key Switch

Basic Operation

Turning the key switch to ON will enable the system and each service can be switched ON or OFF, although after 30 seconds the Gas, Water or Electric buttons will need to be held for 3 seconds to enable or disable.

Upon receiving a fault signal from any external devices, the ServiceGuard will ensure that the gas is isolated to prevent any potential issues and the LCD will advise exactly what the issue is and how to rectify it.

Turning the key switch to the OFF position or pressing the panel stop button will isolate all services.

The internal Open and Display buttons are also available to aid with commissioning and fault finding, providing the details of ALL interfaces at the press of a button.

Technical Specifications

Power Supply:100 - 250VAC 50/60Hz
Power Consumption:40W (Max)
Power Output:
Gas Solenoid: Switched Mains
Water Solenoid: Switched Mains
Electrical Contractor: Switched Mains
IP Rating:IP65 (Providing rear entry sealed)
Approval:CE, UKCA

External Device Interfaces

Valve StatusSPST - 5A @ 250V Max
Pressure TransmitterMonitors Proving Transmitter
24V OutAuxiliary Supply (300mA Max) for CO2T, FGS & FCMON
Gas SensorBACnet Interface for Gas Sensors
CO2 Sensor24V Signal to monitor external VFC
Intake Fan24V Signal to monitor external VFC
Extract Fan24V Signal to monitor external VFC
Remote Stop24V Signal to monitor external VFC

Installer Selectable Options

  • Gas Pipework Fill Time (5 or 10 Seconds)
  • Availability Timer (Off, 4, 8 or 16 Hours)
  • Availability Time for Gas Only or Gas, Water & Elec

NEED THE REQUIREMENTS?

minReq-Kitchen

Commercial
Kitchens

arrow-kitchen
minReq-lab

Teaching
Areas

arrow-lab
minReq-plant

Plant 
Rooms

arrow-plant

Part Numbers & Options / Accessories

PART NODESCRIPTION
SG-PT00ServiceGuard System - Gas, Water & Elec
SGE-PT00ServiceGuard System - Gas & Elec
SGW-PT00ServiceGuard System - Gas & Water

Data Sheets

General specifications in .pdf format

Operation Manuals

Installation and Operation instruction in .pdf format

BIM Files

CAD drawings in .rfa format

There are currently no videos available